How to Check RAM Specification Using Command Prompt

Posted on by Summa Lai

Quick reference:

wmic memorychip list full

In this Windows 10 guide, we will walk you through the steps to learn the technical specifications of the RAM installed on your computer, including part number, manufacturer, serial number, speed, capacity, form factor, memory type, etc.

How to check RAM specification using Command Prompt

While you can use Task Manager to view the memory specs information, if you want to determine more specific details, such as manufacturer, part number, serial number, and more, then you have several commands.

Check memory manufacturer

To determine the memory modules brand installed on the computer, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to check the memory manufacturer name and press Enter:wmic memorychip get devicelocator, manufacturer
  1. Confirm the memory brand under the “Manufacturer” column.

Check memory part number

To find out the part number of each memory module on Windows 10, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to determine the part number of the memory module and press Enter:wmic memorychip get devicelocator, partnumber
  1. Confirm the product number under the “PartNumber” column.

If your desktop computer feels sluggish, a RAM upgrade is perhaps one of the best ways to improve system performance. If you’re not sure which memory modules to purchase, our pick for most devices is the Corsair Vengeance LPX DDR4 16GB Kit. It has reliable performance and quality components, and it’s affordable.

Check memory serial number

To find out the RAM serial number on your computer, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to view the serial number for each memory stick and press Enter:wmic memorychip get devicelocator, serialnumberQuick tip: In the command, you can also replace “devicelocator” with “banklabel” to list the serial number showing the bank’s physical label where the memory is located on the motherboard. For example, wmic memorychip get banklabel, serialnumber
  1. Confirm the product identifier under the “SerialNumber” column.

Check memory capacity

Using Command Prompt, you can determine the total capacity per module and the entire system.

Determine capacity per memory module

To check each memory module capacity on Windows 10, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to determine the memory capacity and press Enter:wmic memorychip get devicelocator, capacity
  1. Confirm the size of each memory module under the “Capacity” column.Quick tip: The capacity information is displayed in bytes, but you can divide the number by 1,073,741,824 (1 gigabyte in bytes) to convert the data into gigabytes.

Determine total system memory capacity

To find out the total amount of memory installed on the computer, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to determine the total physical memory and press Enter:systeminfo | findstr /C:"Total Physical Memory"
  1. Confirm the total amount of physical memory (in megabytes) installed on the device.

Check memory module speed

To confirm the operating module speed, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to determine the memory speed and press Enter:wmic memorychip get devicelocator, speed
  1. Confirm the speed of the memory modules (in MHz) under the “Speed” column

Check memory type

To check the system memory type on Windows 10, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to determine the memory type and press Enter:wmic memorychip get devicelocator, memorytype
  1. Under the “MemoryType” column, confirm the number that identifies the type of memory. (See list below.)

Supported types

Memory types the command can identify:

  • 0: Unknown.
  • 1: Other.
  • 2: DRAM.
  • 3: Synchronous DRAM.
  • 4: Cache DRAM.
  • 5: EDO.
  • 6: EDRAM.
  • 7: VRAM.
  • 8: SRAM.
  • 9: RAM.
  • 10: ROM.
  • 11: Flash.
  • 12: EEPROM.
  • 13: FEPROM.
  • 14: EPROM.
  • 15: CDRAM.
  • 16: 3DRAM.
  • 17: SDRAM.
  • 18: SGRAM.
  • 19: RDRAM.
  • 20: DDR.
  • 21: DDR2.
  • 22: DDR2 FB-DIMM.
  • 24: DDR3.
  • 25: FBD2.
  • 26: DDR4.

Check memory form factor

To check whether the modules are DIMM or SODIMM, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to check the memory form factor and press Enter:wmic memorychip get devicelocator, formfactor
  1. Under the FormFactor column, confirm the form factor information.Quick note: If the output is 8, the device uses DIMM modules (typically available on desktops). Otherwise, if the command output the number 12, the computer uses SODIMM modules (usually available on laptops).

Supported form factors

Form factors the command can identify:

  • 0: Unknown.
  • 1: Other.
  • 2: SIP.
  • 3: DIP.
  • 4: ZIP.
  • 5: SOJ
  • 6: Proprietary.
  • 7: SIMM.
  • 8: DIMM.
  • 9: TSOP.
  • 10: PGA.
  • 11: RIMM.
  • 12: SODIMM.
  • 13: SRIMM.
  • 14: SMD.
  • 15: SSMP.
  • 16: QFP.
  • 17: TQFP.
  • 18: SOIC.
  • 19: LCC.
  • 20: PLCC.
  • 21: BGA.
  • 22: FPBGA.
  • 23: LGA.
  • 24: FB-DIMM.

Check all memory details

The above commands help you to determine the most useful information about the RAM installed on your computer. However, there is another command you can use to query all the available details at the same time.

To view all the memory details on Windows 10, then use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result, and select the Run as administrator option.
  3. Type the following command to list every memory detail possible and press Enter: wmic memorychip list full
  1. Confirm the available information for each memory module installed on the device.
  2. (Optional) Type the following command to view only the specific details and press Enter: wmic memorychip get devicelocator, manufacturer, partnumber, serialnumber, capacity, speed, memorytype, formfactor
  1. Confirm the memory information.

Once you complete the steps, you will have many details about the memory modules installed on your Windows 10 device.

While you can use Command Prompt to query many details about the RAM specifications on your computer, some information may not be available depending on the system’s hardware.

Ref: How to get full PC memory specs (speed, size, type, part number, form factor) on Windows 10 | Windows Central