Logging Level
To enable logging messages from a defined facility that have the specified severity level or higher, use the logging level command. To disable logging messages from a defined facility, use the no form of this command.
logging level facility severity-level
no logging level facility severity-level
Syntax Description
| facility | Facility. The facilities are listed in System Message Logging Facilities. To apply the same severity level to all facilities, use the all facility. |
| severity-level | Number of the desired severity level at which messages should be logged. Messages at or numerically lower than the specified level are logged. Severity levels are as follows: 0 —emergency: System unusable 1 —alert: Immediate action needed 2 —critical: Critical condition—default level 3 —error: Error condition 4 —warning: Warning condition 5 —notification: Normal but significant condition 6 —informational: Informational message only 7 —debugging: Appears during debugging only |
Command Default
None
Command Modes
Global configuration mode
Examples
This example shows how to enable logging messages from the AAA facility that have a severity level of 2 or higher:
switch(config)# logging level aaa 2